Reference: W.H_FW-09.01-L400
Bridge height: 70 mm Bridge width: 115 mm EPDM tape Aluminium
Reference: W.H_FW UCH-22
Material: stainless steel Thickness [mm] 4 Width [mm] 32 Length [mm] 82 Hole diameter [mm] 11 Additional information: Adjustment opening 40x11 mm.
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Banner
Polityka bezpieczeństwa
Zasady zwrotu
The glued base is an innovative assembly for aero construction. Set the footing on the roof covered with tar paper and then set the individual bases at specific distances so that a structure for the panels is formed. The base has special tabs for attaching sheets for mounting rails.
This method is especially recommended for those who do not want to mount PV in an invasive way. The installation does not use screws or anchors screwed directly into the roof, but is only glued with adhesive to the roof and then covered with another piece of tar paper on top.
Load ballast can be used around the footing for safety.
The short base is used at the beginning and end of the mounting of the construction, but can also be used to connect successive PV segments. The set includes a C-profile and screws.
Reference: W.H_FW-09.01-L330
Bridge length: 330mm Bridge height: 70 mm Bridge width: 114 mm EPDM tape Aluminium
Reference: M.H_SRUB MŁ M10X25
These screws can be used to connect profiles as well as to assemble panels with end and middle clamps. Material: stainless steel Height [mm]: 35 Diameter [mm]: 10 Thread length [mm]: 20 Head dimensions [mm]: 10x23x5
Reference: M.H_UCHW DB255
"Flat bar 30x5mm 1: 4016 cold-formed Type L
Reference: W.H_FW-05.01 35MM CZ
Material: Aluminum For module with a frame thickness [mm] 35 Hole diameter [mm] 9 Serration in the place where the module is attached Color: black
Reference: W.H_FW-KPW-03.01
Number of panels to be fitted: 8 standard panels (for other sizes please contact us) Technical data: maximum distance between supports - 2m Depth of driving pins: - 1m Material: hot-dip galvanized structural steel, Mounting rails: 60x40x2 hot-dip galvanized profile
Reference: M.H_SRUB MŁ M10X20
These screws can be used to connect profiles as well as to assemble panels with end and middle clamps. Material: stainless steel Height [mm]: 35 Diameter [mm]: 10 Thread length [mm]: 20 Head dimensions [mm]: 10x23x5
Reference: W.H_FW-KDP-H15ST.01L
Horizontal aluminum mounting triangle with an angle of 15° for mounting solar panels on flat or low-slope roofs. Angle: 40x40 mm Angle thickness: 3 mm
Reference: M.H_UCHW DB225
"Flat bar 30x5mm 1: 4016 cold-formed Type L
Reference: W.H_FW UCH-21.02.00
The glued base is an innovative assembly for aero construction. Set the footing on the roof covered with tar paper and then set the individual bases at specific distances so that a structure for the panels is formed. The base has special tabs for attaching sheets for mounting rails.
Reference: W.H_FW-09.01-L400
Bridge height: 70 mm Bridge width: 115 mm EPDM tape Aluminium
Reference: W.H_FW-KDP-V15ST.01L
Vertical aluminum mounting triangle with an angle of 15° for mounting solar panels on flat or low-slope roofs. Angle: 40x40 mm Angle thickness: 3 mm
Reference: W.H_FW-KDP-H-15ST.01
Vertical aluminum mounting triangle with an angle of 15° for mounting solar panels on flat or low-slope roofs. Angle: 40x40 mm Angle thickness: 3 mm
Reference: W.H_FW-KDP-V15ST.01
Vertical aluminum mounting triangle with an angle of 15° for mounting solar panels on flat or low-slope roofs. Angle: 40x40 mm Angle thickness: 3 mm
The glued base is an innovative assembly for aero construction. Set the footing on the roof covered with tar paper and then set the individual bases at specific distances so that a structure for the panels is formed. The base has special tabs for attaching sheets for mounting rails.
