Reference: W.H_FW-09.01-L400
Bridge height: 70 mm Bridge width: 115 mm EPDM tape Aluminium
Reference: W.H_FW UCH-22
Material: stainless steel Thickness [mm] 4 Width [mm] 32 Length [mm] 82 Hole diameter [mm] 11 Additional information: Adjustment opening 40x11 mm.
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Banner
Polityka bezpieczeństwa
Zasady zwrotu
The trapezoidal bridge is designed primarily for fixing photovoltaic panels on roofs covered with trapezoidal sheets. It was made of aluminum so that it is as light as possible and resistant to deformation. We can mount it directly to the roof covered with sheet metal with screws. The height of the bridge is 70mm and is at the most optimal and right distance between the roof and the solar panel. This distance prevents overheating of the device by providing adequate ventilation under the panels and at the same time protecting them from violent gusts of wind.
The bridges are lined with EPDM tape to ensure full sealing of places where direct fastenings to the tin roof are used.
When installing solar panels on the bridge, we use a sliding tab with an M8 ball stud (square nuts can also be used). Insert such a tab into the upper recess of the bridge and, positioning it in the right place, attach the solar panel to the rail with an end clamp on the extreme edges of the panel.In the case of joining multiple panels, insert the middle clamp between the consecutive panels. The use of middle clamps is necessary to maintain not only ventilation, but above all the safety of the entire installation.
Remember to choose the end and middle clamps with a height appropriate to the thickness of your panels.
Bridge length: 300 mm
Bridge height: 70 mm
Bridge width: 114 mm
EPDM tape
EPDM tape
Reference: M.H_WKRET SM M6X25
Size: 6.0x25 + 16mm / A2 EPDM washer
Reference: W.H_FW-09.01-L330
Bridge length: 330mm Bridge height: 70 mm Bridge width: 114 mm EPDM tape Aluminium
Reference: W.H_FW-25.01-L330
Bridge length: 330 mm Bridge height: 100 mm Bridge width: 119 mm EPDM tape Aluminium
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Reference: W.H_FW-05.01 30MM CZ
Material: Aluminum For module with a frame thickness [mm] 30 Hole diameter [mm] 9 Serration in the place where the module is attached Color: black
Reference: W.H_FW-01.01 CZ
Material: Aluminum Height [mm] 25 Width [mm] 20 Length [mm] 50 Hole diameter [mm] 9 Serration in the place where the module is attached Color: black
Reference: M.H_NAKR PROF M8
<p>T-Slot Nut with M8 ball studs - full name "T-Slot Nut with M8 ball studs". This is a small but very important element that helps in the construction of the structure and installation of solar panels. Thanks to the use of a ball on one end of the gully, it can be set in the desired place without fear of displacement during tightening. A substitute...
Reference: M.H_DW M10X200
"The screw consists of three flange nuts and an EPDM gasket to secure the installation site Double thread M10 x 200 Material: stainless steel Height [mm]: 200 Diameter [mm] : 9 Includes gasket and 3x M10 nut
Reference: W.H_FW-05.01 30MM SR
Material: Aluminum For a module with a frame thickness [mm] 30 Hole diameter [mm] 9 Serration in the place where the module is attached Color: silver
Reference: W.H_FW-05.01 35MM CZ
Material: Aluminum For module with a frame thickness [mm] 35 Hole diameter [mm] 9 Serration in the place where the module is attached Color: black
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Reference: M.H_WKRE JT3 5,5X025
Size: 6.0x25 + 16mm / A2 EPDM washer
Reference: M.H_ZASLEPKA 40X40CZ
Plugs for mounting rails / profiles 40x40, black
