Reference: W.H_FW-09.01-L400
Bridge height: 70 mm Bridge width: 115 mm EPDM tape Aluminium
Reference: W.H_FW UCH-22
Material: stainless steel Thickness [mm] 4 Width [mm] 32 Length [mm] 82 Hole diameter [mm] 11 Additional information: Adjustment opening 40x11 mm.
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Banner
Polityka bezpieczeństwa
Zasady zwrotu
The clamp is made of aluminum. It is mounted between two solar panels by screwing it to the mounting rail with M8 ball studs. The clamp has special teeth on the ends of the grippers to hold the entire PV panel in a secure position. An additional function of the middle clamp is to leave an adequate distance between each successive panel.
Reference: M.H_PODKŁ UZIEM.TYP2
Length: 40 mm Width: 40 mm Height: 10 mm Material: stainless steel
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Reference: W.H_FW-01.01 CZ
Material: Aluminum Height [mm] 25 Width [mm] 20 Length [mm] 50 Hole diameter [mm] 9 Serration in the place where the module is attached Color: black
Reference: M.H_NAKR PROF M8
<p>T-Slot Nut with M8 ball studs - full name "T-Slot Nut with M8 ball studs". This is a small but very important element that helps in the construction of the structure and installation of solar panels. Thanks to the use of a ball on one end of the gully, it can be set in the desired place without fear of displacement during tightening. A substitute...
Reference: W.H_FW-KDP-H-15ST.01
Vertical aluminum mounting triangle with an angle of 15° for mounting solar panels on flat or low-slope roofs. Angle: 40x40 mm Angle thickness: 3 mm
Reference: M.H_NAKR KOŁN M10
Specifications: Flange diameter [mm] 21 Flange height [mm] 2 Serrated on the underside of the flange. Material: A2-70 stainless steel
Reference: W.H_FW-04.03
Mounting profile connector Length: 120 mm Width: 45 mm Height: 25 mm Aluminum
Reference: W.H_FW-KPW-03.01
Number of panels to be fitted: 8 standard panels (for other sizes please contact us) Technical data: maximum distance between supports - 2m Depth of driving pins: - 1m Material: hot-dip galvanized structural steel, Mounting rails: 60x40x2 hot-dip galvanized profile
