Reference: W.H_FW-09.01-L400
Bridge height: 70 mm Bridge width: 115 mm EPDM tape Aluminium
Reference: W.H_FW UCH-22
Material: stainless steel Thickness [mm] 4 Width [mm] 32 Length [mm] 82 Hole diameter [mm] 11 Additional information: Adjustment opening 40x11 mm.
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Banner
Polityka bezpieczeństwa
Zasady zwrotu
Mounting triangles are used when mounting flat or low-slope roof constructions. Mounting triangles are left or right sided. Right sided triangles are used on the edge of the entire construction of the panels. This type is suitable for mounting panels in a vertical orientation.
The whole construction is made of aluminum on an L-type angle bracket base. The use of right and left sided triangles is very important especially if you decide to go into the assembly of a load structure. For this type of solution, L-type profiles are additionally used between the right and left sided triangles, which are then pressed with weights.
Our triangles can be cut so that you can set a slightly different angle to the sun. However, the majority of the surface of the country is located at an angle of 15 degrees.
Reference: M.H_SRUB MA M10X25
Diameter M10 Length: 25 mm Material: Stainless steel A2 (1.4301) Standard: DIN 933
Reference: W.H_FW-KDP-V15ST.01
Vertical aluminum mounting triangle with an angle of 15° for mounting solar panels on flat or low-slope roofs. Angle: 40x40 mm Angle thickness: 3 mm
Reference: M.H_WKRET SM M6X25
Size: 6.0x25 + 16mm / A2 EPDM washer
Reference: M.H_SRUB MŁ M10X20
These screws can be used to connect profiles as well as to assemble panels with end and middle clamps. Material: stainless steel Height [mm]: 35 Diameter [mm]: 10 Thread length [mm]: 20 Head dimensions [mm]: 10x23x5
The VeWiT98 turbine is the most powerful vertical wind turbine today. It can generate power of almost 9800W at 12m/s. A huge advantage of this turbine is that the minimum takeoff speed is 1.2m/s.
Reference: W.H_FW-KDP-V15ST.01L
Vertical aluminum mounting triangle with an angle of 15° for mounting solar panels on flat or low-slope roofs. Angle: 40x40 mm Angle thickness: 3 mm
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Reference: W.H_FW-25.01-L330
Bridge length: 330 mm Bridge height: 100 mm Bridge width: 119 mm EPDM tape Aluminium
Vertical aluminum mounting triangle with an angle of 15° for mounting solar panels on flat or low-slope roofs.
2021-11-23
Płaski dach
Zamontowaliśmy z powodzeniem na garażu w jeden weekend ze szwagrem :)