Reference: W.H_FW-09.01-L400
Bridge height: 70 mm Bridge width: 115 mm EPDM tape Aluminium
Reference: W.H_FW UCH-22
Material: stainless steel Thickness [mm] 4 Width [mm] 32 Length [mm] 82 Hole diameter [mm] 11 Additional information: Adjustment opening 40x11 mm.
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Banner
Polityka bezpieczeństwa
Zasady zwrotu
The end clamp it is used at the beginning and end of the mounting rail. Each clamp has a special serration to hold the panels securely. It is tightened to the mounting rail using an M8 ball studs or square washer. The adhesive is suitable for 30mm thick panels
Reference: W.H_FW-01.01 SR
Material: Aluminum Height [mm] 25 Width [mm] 20 Length [mm] 50 Hole diameter [mm] 9 Serration in the place where the module is attached Color: silver
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Reference: M.H_NAKR PROF M8
<p>T-Slot Nut with M8 ball studs - full name "T-Slot Nut with M8 ball studs". This is a small but very important element that helps in the construction of the structure and installation of solar panels. Thanks to the use of a ball on one end of the gully, it can be set in the desired place without fear of displacement during tightening. A substitute...
Reference: M.H_SRUB MA M10X25
Diameter M10 Length: 25 mm Material: Stainless steel A2 (1.4301) Standard: DIN 933
Reference: M.H_SRUB MŁ M10X25
These screws can be used to connect profiles as well as to assemble panels with end and middle clamps. Material: stainless steel Height [mm]: 35 Diameter [mm]: 10 Thread length [mm]: 20 Head dimensions [mm]: 10x23x5
Reference: W.H_FW-KDP-H-15ST.01
Vertical aluminum mounting triangle with an angle of 15° for mounting solar panels on flat or low-slope roofs. Angle: 40x40 mm Angle thickness: 3 mm
Reference: W.H_FW-09.01-L300
Bridge length: 300 mm Bridge height: 70 mm Bridge width: 114 mm EPDM tape
Reference: W.H_FW-09.01-L400
Bridge height: 70 mm Bridge width: 115 mm EPDM tape Aluminium
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
End clamp for mounting solar panels with a height of 40mm.
