Reference: W.H_FW-09.01-L400
Bridge height: 70 mm Bridge width: 115 mm EPDM tape Aluminium
Reference: W.H_FW UCH-22
Material: stainless steel Thickness [mm] 4 Width [mm] 32 Length [mm] 82 Hole diameter [mm] 11 Additional information: Adjustment opening 40x11 mm.
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Banner
Polityka bezpieczeństwa
Zasady zwrotu
The clamp is made of aluminum. It is mounted between two solar panels by screwing it to the mounting rail with an M8 ball studs. The glue has special teeth on the ends of the grippers to hold the entire PV panel in a secure position. An additional function of the middle glue is to leave an adequate distance between each successive panel. The clamp is used in every construction.
Reference: M.H_PODKŁ UZIEM.TYP2
Length: 40 mm Width: 40 mm Height: 10 mm Material: stainless steel
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Reference: M.H_KLEMA SKR PV AL
End clamp for mounting solar panels with a height of 40mm. Material: Aluminum For a module with a frame thickness [mm] 40 Hole diameter [mm] 9 Serration in the place where the module is attached Color: silver
Reference: M.H_NAKR PROF M8
<p>T-Slot Nut with M8 ball studs - full name "T-Slot Nut with M8 ball studs". This is a small but very important element that helps in the construction of the structure and installation of solar panels. Thanks to the use of a ball on one end of the gully, it can be set in the desired place without fear of displacement during tightening. A substitute...
Reference: W.H_FW-KDP-H15ST.01L
Horizontal aluminum mounting triangle with an angle of 15° for mounting solar panels on flat or low-slope roofs. Angle: 40x40 mm Angle thickness: 3 mm
Reference: W.H_FW UCH-18.05
Double base of the ballast system, east / west 15 degrees. It is using directly for mounting on the roof. This element is a support for two solar panels in the east-west arrangement.
Reference: W.H_FW-09.01-L330
Bridge length: 330mm Bridge height: 70 mm Bridge width: 114 mm EPDM tape Aluminium
Reference: W.H_FW UCH-05.00-468
S-type adjustable reinforced roof bracket / hook with an overall length of 468 mm. Roof bracket designed for mounting solar mounting rails on concrete and ceramic roofs. The bracket is made of 30x5 stainless steel flat bar and allows correction of the attached profile on difficult roofs.
Reference: M.H_WKRE JT3 5,5X025
Size: 6.0x25 + 16mm / A2 EPDM washer
Reference: W.H_PROF MONT 40x40 CZ
Polish production Profile with an increased wall thickness of 1.3 mm It facilitates quick and efficient installation Height: 40 mm Width: 40 mm
Reference: W.H_PROF MONT 40x40 ML
Polish production Profile with an increased wall thickness of 1.3 mm It facilitates quick and efficient installation Height: 40 mm Width: 40 mm
Reference: W.H_FW-04.03
Mounting profile connector Length: 120 mm Width: 45 mm Height: 25 mm Aluminum
2022-12-30
Nacięcia
dobrze dopasowane do paneli, dobrze sprawdzają się nacięte ząbki. chyba nastepnym razem wziałbym srebrne