Reference: W.H_FW-09.01-L400
Bridge height: 70 mm Bridge width: 115 mm EPDM tape Aluminium
Reference: W.H_FW UCH-22
Material: stainless steel Thickness [mm] 4 Width [mm] 32 Length [mm] 82 Hole diameter [mm] 11 Additional information: Adjustment opening 40x11 mm.
Reference: M.H_NAKR KW M8
Technical data: diameter - M8 material - A2 stainless steel (1.4301) Standard - DIN 557
Banner
Polityka bezpieczeństwa
Zasady zwrotu
The mounting profile was manufactured in Poland for construction on roofs or freestanding structures. It is made of aluminum, which allows to keep its dead weight low. This is very important when building structures on roofs of houses or garages. The profile has a length of 2,100 mm and can be freely adapted to your needs. It can be shortened and, thanks to the profile connector, extended to the required length.
From the bottom, the profile has a channel for an M10 screw. This channel allows us to install all kinds of brackets and double-threads that we will need to ""hook"" the profile to the shingles of pitched roofs and tile brackets.
A great advantage of this profile is that it is built in such a way that you can mount solar panels on it by yourself. The profile is double sided and has a mounting channel on top, prepared for end and middle clamps. These clamps can move freely in the inner channel after joining with a square nut or a ball wrench. These clamps will allow us to hold the panels at the extreme ends of the profile and the middle clamps will make it easier to keep the space between consecutive solar panels.
This profile is also great for building free-standing constructions such as large solar farms as well as smaller backyard constructions.
Reference: M.H_DW M10X250
Complete double-threaded screw M10x250 used for mounting photovoltaic systems on all kinds of sheet metal roofing. The screw is necessary when mounting, for example, mounting profiles Double-threaded M10 x 250 Material: stainless steel Height [mm]: 250 Diameter [mm] : 9 Thread length M10 [mm] : 130 Length of rafted thread [mm] : 70 Includes gasket and 3x...
Reference: W.H_PROF MONT L2100
Polish production Profile with an increased wall thickness of 1.3 mm It facilitates quick and efficient installation Height: 40 mm Width 40 mm
Reference: M.H_SRUB MŁ M10X20
These screws can be used to connect profiles as well as to assemble panels with end and middle clamps. Material: stainless steel Height [mm]: 35 Diameter [mm]: 10 Thread length [mm]: 20 Head dimensions [mm]: 10x23x5
Reference: W.H_FW-KDP-H15ST.01L
Horizontal aluminum mounting triangle with an angle of 15° for mounting solar panels on flat or low-slope roofs. Angle: 40x40 mm Angle thickness: 3 mm
Reference: W.H_FW-KPW-03.01
Number of panels to be fitted: 8 standard panels (for other sizes please contact us) Technical data: maximum distance between supports - 2m Depth of driving pins: - 1m Material: hot-dip galvanized structural steel, Mounting rails: 60x40x2 hot-dip galvanized profile
Reference: M.H_KLEMA SKR PV AL
End clamp for mounting solar panels with a height of 40mm. Material: Aluminum For a module with a frame thickness [mm] 40 Hole diameter [mm] 9 Serration in the place where the module is attached Color: silver
